[ripbvbxgmj] 12V Wireless Winch Remote Control Twin Handset For Off-Road Car Truck ATV SUV COD
Description:
1.Fit for all 12V solenoid operated winches
2.Each remote control comes with its own code so there is no interference with other similar remote control.
Feature :
1. Latest Remote System Kit,WITH AUTO POWER OFF!
2. Improved components, Improved reliability, Improved range, Improved battery life.
3. Wireless remote-control kit 12V for winches up to 17,000lb.Approximately 100ft range.
4. Heat shielded cables with pre-fitted heat shrink insulated terminals for easy fitting
Specification:
Supply Power | 12V DC |
Protection Function | On/Off Switch |
Remote Control Distance | 100ft |
Battery | 23A,12V(Not including) |
Principle of operation:
1.Once connected to a power supply, the two output wires of the receiver will go to the supply voltage (12v or 24v depending on the model) when the corresponding button on the transmitter (hand set) is pressed.
2.The output can then be used to operate the trigger terminals on a secondary contactor (solenoid) to switch the main load (e.g. a Winch)
3.The outputs MUST NEVER be connected to earth as otherwise they will short circuit and burn out.
4.If you have any doubt about which are the trigger terminals on your solenoid, first check by using a thin piece of wire connected to the positive supply, when you apply it to one of the solenoid trigger terminals the winch should run in one direction, if you apply it to the trigger terminal it should operate in the opposite direction.
5.In most cases winches are fitted with a plug in wander lead, at the back of the wander lead socket you will see three wires. One of the wires is the positive feed to the wander lead switch, depending on which way the switch is pressed this feed will then be diverted down one of the other two wires (the output wires) which will in turn be connected to the trigger terminal of the solenoid.
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
4.(IMPORTANT) No Instructions Included. Professional Installation Is Highly Recommended!!!
Package Included:
2 X | Wireless Electric Remote Control |
1 X | Receiver |
